Hoses & Fittings

×

Polypropylene Quick-Connect Couplings

For use in the fertilizer, chemicals, petroleum and transport industry.

Features

  • Molded of glass reinforced polypropylene
  • Nylon levers standard
  • Stainless steel levers available
  • Stainless steel pins and rings
  • Interchangeable with other brands
  • Resistant to many chemicals, rust proof
  • Manufactured to military specifications
  • Retained gaskets in couplers will not fall out when connections are open
  • Size identification molded into each part
Download Product Bulletin

Strainers & Street Elbows

High quality and precision molded, Pacer's Strainers and Street Elbows are chemical resistant and lightweight yet rugged.

Strainers keep foreign material from damaging pumps and systems.

Street Elbows are used for a variety of pump and piping applications. Prevents discharge hose kinking.

Download Product Bulletin

Features

  • Strainers made from Halar® or Polyethylene
  • Street Elbows made from Polypropylene
  • 1 1/2", 2" and 3" sizes (NPT and BSP available)

Hose Barb Fittings

Pacer Pumps' Hose Barb Fittings are high quality and precision molded, with good chemical resistance.

Download Product Bulletin

Features

  • Polypropylene, glass reinforced
  • Temperature range 10° to 180°F
  • Working pressures 1 1/2", 2" & 3" 150 PSI @ 70°F
  • Good Chemical Resistance
  • Sizes 1 1/2", 2" and 3" with male NPT Threads

Hose Accessories Kits

Pacer Pumps' Hose Accessories Kits include 20' PVC suction hose, 25' PVC discharge hose, with either threaded connections or CAMELOT® polypropylene quick-connect couplers. Also included in each kit is a polypropylene discharge elbow, polyethylene suction strainer and a roll of Teflon® tape to seal connections. Hose Kit available in 1 1/2", 2" or 3" with threaded connections or quick-connect couplers.

Download Product Bulletin

Camelot Full Port Ball

Pacer's Camelot ball valves are molded of glass filled polypropylene. The end caps and valve stem are also glass reinforced for extra strength. Polypropylene has outstanding corrosion resistance to a broad range of chemicals. Note the features that a Camelot ball valve gives you:

  • Valve stem, Viton® "O" - ring sealed
  • "Stop Blocks" provide positive ON or OFF positioning of handle
  • NPT female threads
  • Smooth, tapered transition between pipe and ball for low pressure drop
  • Body, EPDM "O" - ring seal
  • Stainless steel bolts
  • Long handle for easy grasp and easy opening
  • Solid Teflon® ball seats - self lubricating
  • Free floating ball for positive alignment and sealing
  • Stainless steel nuts and washers
  • All valves are full port for full flow

Download Product Bulletin